crwdns2933803:09crwdne2933803:0
crwdns2933797:0Carsten Frauenheimcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Carsten Frauenheim
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [* black] Slowly pull up to work the top case away from the bottom case. | |
| [* icon_note] Be extremely careful and make sure no internal components come out with the top case. | |
| [* icon_note] There are bearings installed in the top case that may stay with the bottom half of the case. | |
| [* black] Completely remove the top half of the transmission case. You may have to "walk" the top half of the case off of the shafts it is slotted through. | |
| [* icon_reminder] Reinstallation tip: [https://d3nevzfk7ii3be.cloudfront.net/igi/SsUVytN1cYFZXPxF|Scrape off old gasket] before putting the transmission back together. Use a Scotch-Brite pad to remove any stubborn gasket from all mating surfaces, and do a final cleaning with isopropyl alcohol. | |
| [* icon_caution] Be extra cautious to not let any old gasket fall into the transmission case oil basin, as debris could potentially harm future performance. | |
| [* icon_reminder] Reinstallation tip: When reapplying liquid gasket to the transmission case, [https://d3nevzfk7ii3be.cloudfront.net/igi/P22UOVo56mQtGBXC|run a 2-4 mm bead along all gasket mating surfaces] on both the left and right transmission cases. Use HondaBond 4, ThreeBond 1216 or an equivalent liquid gasket. Reassemble both transmission halves within 10 minutes of applying the liquid gasket. | |
| + | [* icon_reminder] Reinstallation tip: If necessary, use a mallet and lightly tap the right transmission case until mostly flush with the left transmission case when putting the two halves back together. |