crwdns2933803:02crwdne2933803:0
crwdns2933797:0iRobotcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 iRobot
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| - | [* black] If the voltage is below about 2.75 volts, the battery will have to be removed. Using a soldering iron, melt the solder holding one of the solder tabs to the board. While the solder is molten, pull the solder tab away from the board with a pair of tweezers. |
|---|---|
| + | [* black] If the voltage is below about 2.75 volts, the battery will have to be removed. Using a soldering iron, melt the solder holding one of the solder tabs to the board. While the solder is molten, pull the solder tab away from the board with a pair of [product|IF145-020|tweezers]. |
| [* black] Repeat the procedure for the other solder tab. | |
| [* black] The battery is held to the board with a piece of double sided fabric tape. This will probably rip apart when you pull the battery off. | |
| [* black] It would be a good idea to put shrink tubing around the new battery to ensure it doesn't short out to anything on the control board. |