crwdns2936039:0Repairing Samsung Galaxy Tab 2 7.0 3G SIM Socketcrwdnd2936039:07crwdne2936039:0

crwdns2933803:07crwdne2933803:0

crwdns2933797:0Erika Heppnercrwdnd2933797:0Yan 11, 2018crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Adam O'Camb

	[title] Test before closing
	[* black] If everything works, put the PCB board back with the dock-connector in first.
-	[* black] ~~Connect~~ all 8 of the flex connectors.
-	[* ~~black~~] ~~Screw all 11 screws back into place~~.
-	[* black] ~~DO NOT CLOSE THE COVER~~.
-	[* ~~black~~] ~~Test the function of the device again with the cover open. Test 3G to see if it comes on several times to see if it is still working. Test especially after you tighten all~~ of the screws.
-	[* ~~yellow~~] ~~Loosen some of the screws if the 3G SIM is failing, as this could be the cause of the problem. If you need to, insert spacers between the PCB board and case around the SIM-Slot. Be aware~~ that the spring contact between the PCB board and the 3G antenna ~~needs to be~~ widened a little.
+	[* black] Next, connect all 8 of the flex connectors and then screw all 11 screws back into place.
+	[* icon_caution] Make sure to not close the cover.
+	[* black] While the cover is open, test the 3G function to see if it comes on several times. Make sure to also test after the screws are tightened.
+	[* yellow] Loosen some of the screws if the 3G SIM is failing, as this could be the cause of the problem. If needed, insert spacers between the PCB board and case around the SIM slot.
+	[* icon_note] Make sure that the spring contact between the PCB board and the 3G antenna are widened a little.