crwdns2933803:08crwdne2933803:0
crwdns2933797:0Tarun Thirumacrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Tarun Thiruma
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [* black] Remove the camera bracket from the rear glass. | |
| - | [* icon_reminder] Check your replacement rear glass panel for new adhesive for the camera bracket and fingerprint sensor assembly. If there is none, you will need to reuse or apply your own adhesive during reassembly. |
| - | [* icon_note] If reusing adhesive, be sure to remove any large bits of adhesive that may prevent the device from fitting back together properly. After affixing your back panel back into place, apply heat to re-bond your adhesive. Your device will probably lose its water resistance, but the residual adhesive is usually enough to secure your device back together. |
| - | [* icon_note] If replacing the adhesive, clean all adhesion areas with high concentration isopropyl alcohol (90%+) and a lint free cloth before applying new adhesive. Wipe in one direction to avoid smearing. |
| + | [* icon_reminder] Check your replacement rear glass panel for new adhesive for the camera bracket and fingerprint sensor assembly. If there is none, you will need to apply your own adhesive during reassembly. |
| + | [* icon_note] If replacing the adhesive, clean all adhesion areas with high concentration isopropyl alcohol (90%+) and a lint free cloth before applying new adhesive from [guide|113604|pre-cut adhesive sheet|new_window=true]. Wipe in one direction to avoid smearing. |