crwdns2933803:02crwdne2933803:0
crwdns2933797:0Roberto Bartolaccicrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Roberto Bartolacci
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| - | [title] |
|---|---|
| - | [* black] Detach the adhesive stripe that secures the webcam and display |
| - | [* yellow] Disconnect the fan's ribbon connector. [guide|25629|It would be better if you would follow this method (step#2)|stepid=64970] but if you do not properly manage to grab the connector with your fingers, take two pairs of tweezers |
| + | [title] Release the fan |
| + | [* black] Detach the adhesive stripe that secures the webcam's and the display's cable to the fan. |
| + | [* yellow] Disconnect the fan's ribbon connector. [guide|25629|It would be better if you would follow this method (step#2)|stepid=64970] but if you do not properly manage to grab the connector with your fingers, take two pairs of tweezers, grab all the wires as close as possible to the connector ─ as it is shown in pic#2 ─ and resolutely pull them straight up. |
| [* blue] Using a PH#00 screwdriver remove the two Phillips PM2.5×4.5 screws and group them together. | |
| [* violet] Using a PH#00 screwdriver remove the last Phillips PM2.5×6.5 screw that secure the fan to the top cover. ''Do not group it together with the two previous screws because it is longer than those.'' |