crwdns2933803:03crwdne2933803:0
crwdns2933797:0Jānis Baumaniscrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Jānis Baumanis
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [title] Separate components from frame | |
| - | [* black] Charging controller circuit board is locked to frame with two little screws and two frame fixing pins at sides. Remove screws with Philips 000 screwdriver. Carefully bend fixing pins aside to loose board. |
| - | [* black] Battery is glued to frame with weak glue. Use prying tool or plastic card to loose battery from frame. Don't tear off temperature sensor - it is attached to one battery side with kapton tape. |
| - | [* black] After component removal from frame failure cause became clear. Negative battery terminal teared from controller board. Probably got stressed on assembling and teared later on impact against pavement or hard floor. Battery still had 4.1V (nearly full). |
| + | [* black] Charging controller circuit board is locked to frame with two little screws and two frame fixing pins at sides. Remove screws with Philips #000 screwdriver. Carefully bend fixing pins aside to loose board. |
| + | [* black] Battery is glued to frame with weak glue. Use prying tool or plastic card to loose battery from frame. |
| + | [* icon_caution] Pay attention to temperature sensor which is attached to one battery side with kapton tape. Don't tear it off on battery removal. |
| + | [* icon_note] After component removal from frame failure cause became clear. Negative battery terminal teared from controller board. Probably got stressed on assembling and teared later on impact against pavement or hard floor. Battery still had 4.1V (nearly full). |