crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

crwdns2933803:02crwdne2933803:0

crwdns2933797:0Arielle Sampsoncrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Arielle Sampson

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0

crwdns2933807:0crwdne2933807:0

[* black] Use a heat gun to lightly heat the edges of the back to soften the adhesive that connects the back cover to the rest of the frame.
-[* icon_note] An iFixit iOpener, hairdryer, or hot plate can also be used to heat the edges. See the[guide|25705|iOpener Heating guide] for instructions on using the iOpener.
-[* icon_caution] Using a heat gun, hair dryer, or hot plate will make the metal frame rather hot to the touch, so handle it with care.
-[* icon_caution] Be careful not to overheat the device –the OLED display, battery and other internal parts can be damaged by excessive heat. Approximately one minute should be enough to soften the adhesive.
+ [* icon_caution] Using a heat gun, hair dryer, or hot plate will make the metal frame rather hot to the touch, so handle it with care.
+ [* icon_caution] Be careful not to overheat the device –the OLED display, battery and other internal parts can be damaged by excessive heat. Approximately one minute should be enough to soften the adhesive.
+[* icon_note] An iFixit iOpener, hairdryer, or hot plate can also be used to heat the edges. See the [guide|25705|iOpener Heating guide] for instructions on using the iOpener.