crwdns2933803:010crwdne2933803:0
crwdns2933797:0Erik Erikssoncrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Erik Eriksson
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| - | [* black] After the battery has been removed, the clear tape on the old battery needs to be removed. Do this by carefully unwrapping the clear yellow tape from the battery. ++Any excessive force will damage the battery.++ |
|---|---|
| - | [* black] Next, de-solder the old battery circuit from the old battery. ++You will need this circuit, so be careful not to damage it!++ |
| - | [* black] ++***If you heat up the battery too hot, it will explode! You must be quick when de-soldering and soldering to the battery!***++ |
| + | [* icon_caution] You need to be ***very careful*** on this step, if you touch the battery whit the soldering iron the battery may ***explode***. |
| + | [* icon_caution] Do ***NOT heat*** upp the battery to much or it may also ***explode***, you need to be quick doing the soldering. |
| + | [* black] Remove the clear tape from the old battery. |
| + | [* black] De-solder the old battery circuit from the old battery. |
| + | [* icon_note] You will need this circuit, so be careful not to damage it! |
| [* black] De-solder the battery circuit that comes with the new cell, and solder the battery circuit from the old ring battery to the new battery. This will convert your new cell to a cell compatible with the Ring's charging circuitry. | |
| - | [* |
| + | [* icon_reminder] Make sure to observe polarities. The solder pad with the red wire next to it goes to the '+' poll on the battery, and the solder pad with the black wire goes to the '-' poll on the battery. |