crwdns2933803:01crwdne2933803:0
crwdns2933797:0Murathan Arazcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Murathan Araz
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| [* orange] Insert the [http://zaribo.org/hardware/12-linear-bushings-bearing-single-type-by-misumi.html|Misumi LM8UU] bearings to the x axis motor holder. Use 2 x [http://zaribo.org/screws-nuts/67-zaribo-screw-kit.html|M3x10 socket Cap Screws] and 2 x [http://zaribo.org/screws-nuts/67-zaribo-screw-kit.html|M3 Nylon Nuts] to squeeze the bearing holder. Do not tighten it too much, just to keep the bearing in place. Not more. | |
| - | [* icon_ |
| + | [* icon_reminder] Warning, bearing tightener nuts are NYLON M3 Nuts, not the regular nuts. |
| [* red] Put the [http://zaribo.org/stepper-motors/38-original-prusa-mk2-mk3-pom-nut-zaribo-edition.html|POM Nut] in its place and align the unthreaded holes. Use 2 x [http://zaribo.org/screws-nuts/67-zaribo-screw-kit.html|M3x18 Socket Cap Screws] and 2 x [http://zaribo.org/screws-nuts/67-zaribo-screw-kit.html|M3 Nuts] to fasten the pom nut. | |
| [* black] Push the [http://zaribo.org/other/63-2gt-6mm-belt-timing-pulley-16t-toothed.html|GT2 Pulley] to the motor shaft but to not fully tighten the small screws on the pulley yet. | |
| [* green] Use 3 x [http://zaribo.org/screws-nuts/67-zaribo-screw-kit.html|M3x18 Socket Cap Screws] and 2 x [http://zaribo.org/screws-nuts/67-zaribo-screw-kit.html|M3 Nuts] to fasten the pom nut. | |
| [* light_blue] Insert 2 x [http://zaribo.org/screws-nuts/67-zaribo-screw-kit.html|M3 Square Nuts] to the motor holder body and 1 x [http://zaribo.org/screws-nuts/67-zaribo-screw-kit.html|M3 Square Nut] to the cable guide body. | |
| [* blue] Use a [http://zaribo.org/screws-nuts/67-zaribo-screw-kit.html|M3x0.6 Flat Head Screw] to mount the X motor cable guide housing. | |
| [* violet] After installing the X motor cable through the guide channel, use a [http://zaribo.org/screws-nuts/67-zaribo-screw-kit.html|M3x12 Socket Cap Screw] for the upper hole and a [http://zaribo.org/screws-nuts/67-zaribo-screw-kit.html|M3x18 Socket Cap Screw] for the bottom hole to mount the X motor cable guide cover. |