crwdns2933803:05crwdne2933803:0
crwdns2933797:0Shelby Hemphillcrwdnd2933797:0crwdne2933797:0
crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Evan Noronha
- crwdns2933769:0crwdne2933769:0
- crwdns2933771:0crwdne2933771:0
- crwdns2933801:0crwdne2933801:0
crwdns2933807:0crwdne2933807:0
| - | [* red] Unsolder the connection from the logic board to the frame on the right side |
|---|---|
| - | [* blue] Remove the small ribbon cable which connects the button board to the logic board. It is a simple push-in connector. A small pair of tweezers or hemostat will work great for this. |
| - | [* red] Remove the screw on the top right side. This is the last connection of the LCD holder to the midframe. |
| - | [* blue] This is the last connector. Remove the cable by opening the connector. Move the black clip into the upward position to free the Cable. This will remove the LCD as well as the LCD holder. |
| + | [* red] Disconnect the logic board from the frame on the right side of the device. |
| + | [* blue] Remove the small ribbon cable, connecting the button board to the logic board, with small pair of tweezers or hemostat. |
| + | [* red] Remove the screw on the top right side of the device connecting the LCD screen holder to the midframe. |
| + | [* blue] Move the black clip into the upward position to disconnect the cable. |
| + | [* black] You will now be able to remove the LCD screen and its holder from the device. |