| ''Before following guide check to make sure:'' |
|
| * Power button is not broken |
| * Battery is completely connected |
| * Battery latch is closed completely |
|
| ''If all of the above are checked and your camera will still not power on, please refer to these steps.'' |
|
| == Battery Replacement Steps == |
|
| # Place the camera face down on a table (lens facing down) . |
| # On the bottom right corner of the camera is the battery latch. |
| # Firmly press and slide the latch to the right. The latch should open and come off. |
| # Then remove the defective/dying battery from camera. |
| # Place the replacement battery back into camera and secure the latch back on by placing it back in between guides and slide to the left. |
| After the completion of the steps above, you have successfully replaced your camera's battery. |
| Batteries are one of the most commonly replaced components in almost any device. Batteries are not designed to last forever and will run out of energy in time (dependent on usage of the device). In the event of your camera not powering on upon pressing the on/off button, one of the first components you should focus on is the battery. The battery is the most common issue when the device is not powering on and it is the easiest to fix. This guide will go through alll of the steps to show and explain how to replace the battery of the Canon ELPH Z3. It is a quick, safe, and easy process to follow that will not take much time. |