'''Step One:''' |
At the bottom of the device there are two small screws, use the +J00 screwdriver head and unscrew the screws. |
|
'''Step two:''' |
Use the plastic opening tool and pry out the white backplate of the device. |
|
'''Step Three:''' |
Follow the black and red wires coming from the white black plate. It will be attached to the motherboard. You will need a soldering gun for this. Gently use the gun and remove the wires from the motherboard. Use the sharpest metal spudger from the spudger set and pry open the speaker from the case. Then put the new speaker in. |
For this guide you will need the following tools and components: |
Screwdriver |
+J00 screw head |
Metal Spudger set |
New speaker piece |