|
Conclusion |
Arbeite die SchritteTo reassemble your device, follow these instructions in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauenreverse order. Please pay attention to the following steps:
-On the two FPC-ConnectorsPCB with the big capacitor whereyou have to pulled out the FPC, justpush the FPC in. There is no lever on the socket.
- On all other sockets,PFC open the lever first, slide in insertthe FPC PFCand close the socket.
- Be careful with the thick wires going to the flash, They may keep keep the flash from opening.lever Try this out before closing the camera.
- Don'Dontt forget so secure to re-gluethe beeper and his wire.
- Also remember to glue on cable andthe smallcopper foil. |
|