|
Introduction |
WARNING: Before you start any type of disassembly process on your Vtech InnoTab 3s, make sure it is turned off otherwise, you will cause further damage to your device. | | Use this guide if your Vtech InnoTab 3s doesn’t function properly or turn on. This guide provides information to carefully remove the device’s motherboard. | | If your Vtech InnoTab 3s is not functioning properly or shows no signs of turning on, this guide will give you information on how to safely remove the motherboard from the device. Resolving this issue with our few simple steps will ensure that all data from this device will be saved. | | The motherboard functions as the device’s “brain”. The motherboard controls all data input and output. If your Vtech InnoTab 3s’ motherboard dies, you can replace it with minimal technical knowledge in a cost-efficient way. | | No special skills are required. However, you will need a spudger and sizes 5,6, and 7 mm screwdrivers to open up the back of the device where the motherboard is located. These are the six screws that will secure the motherboard to the front panel of the device. | | Before disassembly, power off your device. Working with a powered-on device can further damage its motherboard. |
|