|
Introduction |
| The Flex Cable transmits data to the screen. It may be broken if the camera appears to be working, however the display screen shows pixelated lines.You can repair the LCD Display by removing the broken Flex Cable and replacing it with a new one. | | | Replacing the Flex Cable of the DCR-SR42 is a simple procedure that will take no more than 45 minutes. However, the user should be careful when disassembling the camera in order to avoid damaging the flex cable or any other internal components of the camera. The user should also ensure that the battery is disconnected from the camera at least an hour before disassembly is attempted, since capacitors inside the camera can remain charged with electricity some time after the battery is removed. It is necessary to allow capacitors to discharge to prevent injury to the user or damage to the camera. | | | For problems pertaining to the Flex cable, please refer to the [[Sony Handycam DCR-SR42 Troubleshooting#Section_Wavy_lines_on_screen|Sony Handycam DCR SR-42 Troubleshooting Guide]] |
|