crwdns2866306:0crwdne2866306:0 |
|
Type |
|
Thing |
CMOS reset/maintenance mode |
|
Title |
How to boot Intel D945PSN in maintenance mode (if ram failure or any other issue that will prevent from booting) |
|
Introduction |
After spending half the day looking for how to reset CMOS, nothing worked. | | Issue symptoms - after setting RAM mode to aggressive, system went into ram failure (3 long beeps with no possibility to enter setup). Nothing worked - tried removing the battery, shorting battery pins, nothing happened, same 3 long beeps. | | * Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)So, near the battery there is the CMOS Jumper - 3 pins, last two of them from left to right are connected with a jumper. | * Turn off the power source or unplugg it, take the jumper out and place it on the first two pins (from left to right). | * Then plug the computer to power and start the system. It will take you to maintenance mode where you can change the faulty settings (in my case RAM management). | * After you save the settings, bios will let you notice that you need to put the pins in the normal position in order to boot. | * Power off, unplug the power, put the Jumper back, and you're set. You can safely turn on. |
|
Time Required Min |
crwdns2931273:0crwdne2931273:0
|
Time Required Max |
crwdns2931273:0crwdne2931273:0
|
Difficulty |
Moderate
|
Conclusion |
To reassemble your device, follow these instructions in reverse order. |
|
Author |
|
Public |
crwdns2853046:0crwdne2853046:0
|
crwdns2935255:0crwdne2935255:0
- In Progress added.
- Community-Contributed Guide added.
crwdns2933623:0crwdne2933623:0
crwdns2933815:01crwdne2933815:0