crwdns2894164:0crwdne2894164:0

crwdns2892124:0crwdnd2892124:0Canon PowerShot SX200 IS Lens Disassemblycrwdnd2892124:0crwdne2892124:0

crwdns2892146:0Philip Le Richecrwdnd2892146:0crwdne2892146:0

crwdns2875918:0crwdne2875918:0 crwdns2892120:0crwdne2892120:0 Philip Le Riche

crwdns2892174:0crwdne2892174:0
crwdns2892176:0crwdne2892176:0
crwdns2892148:0crwdne2892148:0
crwdns2866306:0crwdne2866306:0
Canon PowerShot SX200 IS Lens Disassembly
Type
replacement
Thing
Zoom lens assembly
Title
Canon PowerShot SX200 IS Lens Disassembly Zoom lens assembly Replacement
Introduction
You will require a fair amount of patience as reassembly is a little tricky. Note that it is very easy to get fingermarks or dust on the optical components but much harder to completely remove them. Particularly on the focussing lens and the image sensor, any contamination will have a significant or major effect on image quality.
You will need a small cross-head screwdriver and a small craft knife. Additionally, a pair of fine tweezers will be helpful, and cocktail sticks are useful for releasing ribbon cables from their sockets. If you need to clean the optical components you will need some isopropyl alcohol and non-linting cotton swabs or lint-free cloths. Unless your eyes can focus at distances less than 10cm a magnifying glass or jeweller's eye loupe will be helpful.
Time Required Min
crwdns2869222:0crwdne2869222:0
Time Required Max
crwdns2869222:0crwdne2869222:0
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
crwdns2853046:0crwdne2853046:0
Summary
A previous guide showed the disassembly of the Canon PowerShot SX200 IS but stopped short of disassembling the lens. The present guide should allow a stuck lens or Lens Error to be diagnosed and hopefully fixed.

crwdns2892150:0crwdne2892150:0

  • In Progress added.
  • Member-Contributed Guide added.

crwdns2892170:0crwdne2892170:0

Step #: 1
crwdns2892174:0crwdne2892174:0
crwdns2892176:0crwdne2892176:0