|
Introduction |
| To start you are going to want to know some things: | | | An ESD Safe mat is recommended, but optional. This also includes the ESD safe bags, and Kapton tape. | | | REQUIRED: Spudger or some kind of tool to separate pieces and Phillips #00 Driver | | | This phone has several main components in the following order: | | | # Back Plate | | # Battery | | # Rear Chassis | | ## Speaker Housing | | # Main Board | | # Keyboard Bezel | | ## Button Pad | # DisplaySlider Plate | | ## Call / End / Clear buttons and board | | # LCD | | # Touch Screen / Top Plate | | | '''Keep in mind '''that this is in fact a phone that is held together by snap in plastic pieces. If you pry things too roughly or force things to open too quickly you can damage the device. | | | These steps should cover most if not all details of the take apart and re assembly. |
|