|
Introduction |
The JBL Clip 3 speaker has a rather simple design. It features 3 buttons at the speaker's center for pausing/unpausing and increasing or decreasing volume. If the buttons fail to function, the button motherboard may need to be replaced. | | This Guide demonstrates how to replace the button board on a JBL Clip 3 speaker step-by-step. This process is beginner-friendly and requires knowledge of basic tools. | | | This Guide demonstrates how to replace the button board on a JBL Clip 3 speaker step-by-step. This process is beginner-friendly and requires knowledge of basic tools. Be cautious when removing components and wires since they are fragile and can damage the speaker's functionality. | | The JBL Clip 3 speaker has a rather simple design. It features three buttons at the speaker's center for pausing/unpausing and increasing or decreasing volume. If the buttons fail to function, there are various reasons why this could be the case. The problem could be a faulty button or debris stuck in the button. Before using this guide, test to make sure that your button is not the issue and confirm that the issue is the speaker's button board. | | | Note: Before starting, make sure to power off the JBL Clip 3, and disconnect it from any power sources. |
|