|
Introduction |
If you would like to replace the projector lens, you can use this guide. For this guide, you will mostly be using a screwdriver and a bit of force. | | Replacing the lens requires you to completely take off the circuit board. If the lens for example is cracked and needs to be replaced, use this guide. But on the other hand, what your projecting has dark spots on it etc. the lens may just need to be cleaned and not replaced. If you only want to replace the lens and already have the circuit board off the guide for that start at step 9. For this guide you will need an opening tool and a screwdriver. The steps aren't difficult but require you to be careful as the cords are weak, the lens is fragile, and some spots have rivets which are also fragile. |
|