|
Introduction |
| ***USB charging port replacement:*** | | | ''If your phone isn't connecting to the charger, it's not holding a stable connection or just overall having a hard time keeping a charging connection, and it's time to be replaced. This guide will walk you through the replacement process.'' | | | WARNING: Charging port circuits are made of a product that causes cancer in the state of California. Likewise, if the chip is damaged, particles from the chip can be inhaled. If you inhale microchip particles, please contact the poison help line. If you accidentally ingest the chip and are choking, seek your nearest Hemleich menuvever-trained individual. If you have inhaled a chip but are not choking, you should go to the hospital. They'll probably pump your stomach out. | | | Step one: Once both are removed place the circuits to the side in a safe location and start unscrewing the USB-C charging port ( use the ifixit tool 4mm screwdriver bits phillips 000) | | | Step step: Now that all the screws are out of the USB chip, remove the wire. Now that all the screws are removed, place the wire to the side and use the same screwdriver ( from step three) and unscrew the plastic bracket. You put it to the side as well. | | | Step three: Next you will remove the screws from the circuit ( with the ifixit tool philips 00 4mm screen driver) and place that to the side. | | | Step four: Lastly, once the motherboard is completely free remove it and now remove the wire from the cricut. |
|