|
Introduction |
Use this guide to replace the motherboard in your Kobo Clara BW (N365 model) eReader.
***Important:*** There are two Clara BW versions: ***N***365 and ***P***365. Check your eReader's model number (printed near the bottom of the rear case) before starting this guide. This guide is for the P365 model. Click [guide|183488|here|new_window=true] for the P365 model guide instead. | | | The charging port is soldered to the motherboard, so you'll need to replace the entire motherboard if you want to replace the port. | | | Following this guide will remove your eReader's IP (Ingress Protection) rating, making it susceptible to water damage. | | | After this repair, follow [guide|170983|this guide|new_window=true] to calibrate your eReader to your replacement motherboard. If you don't, you might experience "ghosting" or visual artifacts of the E ink. | | | ***Kobo supports their eReaders with a warranty. If your device is still under warranty, Kobo may be able to help. Before starting a repair, [link|https://help.kobo.com/hc/en-us/articles/360020774573-View-warranty-and-legal-information-on-your-Kobo-eReader|review your warranty information|new_window=true] or [link|https://www.kobo.com/userguides|check support documentation|new_window=true].*** |
|