|
Introduction |
The Swivel Wheel of the Bissell Zing 2156A helps the vacuum maneuver around. It can easily get clogged with pet hair or other derbies. This guide shows how to remove it, after which you can easily clean it, or replace it with another donor wheel.[br]
Like most canister vacuums, this unit uses wheels to help keep it mobile in a variety of floor type. The Bissell Zing 2156A uses three total wheels, two [link|https://www.ifixit.com/Guide/Bissell+Zing+2156A+Rear+Wheel+Replacement+Guide/171449|rear wheels|new_window=true] and one swivel wheel. If the vacuum's wheels are stuck, replacing these can be a great way to get it going again.
The front swivel wheel is very fragile for how much punishment it must take, and its fastener is easily damaged when attempting to remove the swivel wheel. This repair cannot be made many times without also needing a new bottom casing.
Hair or other debris inside this wheel, and by their nature, these wheels are often right where messes are, so gloves might be advisable. Otherwise, this is an easy repair! |
|