|
Introduction |
If you need to change or fix your camera first you would need to pop off the top white casing and then you would continue to disconnect all the wires connecting the motherboard to the camera and once that is disconnected start by flipping over the white and black casing and unscrewing the five screws that are located inside the casing and once they are unscrewed find the two screws located on the inside of the casing and unscrew them and pop off the camera see if the camera is damaged or scratched and then decide yourself if you need to replace the camera or clean it. | | Replacing your camera for the Enabot can be essential for your experience. Sometimes your camera can impact your experience with the Enabot since you're viewing everything through the camera. Sometimes the camera can be dirty or not functioning properly. In these following steps we will show you how to replace your camera |
|