|
Introduction |
| This guide shows how to remove and replace a speaker assembly for the Meta Quest 2. | | | The speaker assembly includes the speaker and the arm, which guides the sound to the ear. | | | This guide is written with the left speaker, oriented as you wear the headset. If you’re replacing the right speaker (or both), you can use the same procedure. | | Removing the speaker assembly requires significant disassembly of your headset. If your battery is worn, consider taking this opportunity to replace it—it's normally hard to reach, but is [https://www.ifixit.com/Guide/Meta+Quest+2+Headset+Battery+Replacement/169153#s358587guide|169153|easily accessible during this repair|stepid=358587|new_window=true]. | | | ***Note:*** You'll need a long PH00 bit or a dedicated PH00 screwdriver to remove some recessed screws. |
|