|
Introduction |
| ***++Before you start++*** | | Sometimes drill chucks can be extremely difficult to remove by hand because they experience a lot of stress during use, but often it can be done with a large enough screwdriver. To avoid stripping the screw at the bottom of the chuck, an impact tool may be extremely beneficial. | | Due to the stress they go through while being used, drill chucks can be hard to take off by hand. On the other hand, a screwdriver that is big enough can usually do the job. Working with an impact tool can be very helpful if you don't want to damage the screw at the bottom of the chuck. | | | ***++Safety:++*** | | | For your safety places make sure that the Ryobi D620H Hammer Drill is not connected to any power sources before repairs. |
|