|
Introduction |
| If your ASUS VivoBook S400C has a broken touchscreen or continues to have issues even after going through the [[ASUS VivoBook S400C Troubleshooting#Section__Touchscreen_doesn_t_work_after_Windows_Update|touch screen trouble shooting guide|new_window=true]] to rule out any software issues, use this guide to replace it. Before you begin, make sure the laptop is completely turned off and the battery has been removed. | | | The digitizer is not bonded to the LCD display, and so can be replaced without having to also replace the LCD if the LCD is not damaged. Although the digitizer is available without the front bezel, this guide does not address separating the touch screen from the bezel but only shows how to replace the assembly as a single unit. | | Although it is best practice to unplug the battery before disconnecting electronics, it is relatively safe to follow this guide if the laptop is completely powered down before starting. Be careful not to accidentally turn it on while working on it. | | Warning: If the glass display is completely shattered, please remain safe by following the directions [guide|103487|here|new_window=true] on how to tape over any glass and prevent being hurt. | | If you want to be absolutely sure of the safety of your electronics, follow the first three steps of the [guide|128487|ASUS VivoBook S400C Battery Replacement|new_window=true] guide before beginning. | | ''If there is a possibility you will need to replace the LCD adhesive and want to have all parts on hand before you begin, read through the [guide|150137|ASUS VivoBook S400C LCD Adhesive Replacement|new_window=true] guide and consider ordering the [link|https://www.amazon.com/MMOBIEL-Adhesive-Tablets-Digitizer-Professional/dp/B00PVZM9TY/?tag=ifixitam-20|3 mm Double Sided Adhesive Tape].'' |
|