|
Introduction |
| The Garmin fenix 6X Sapphire is a fitness watch identified by Garmin as part numbers 010-02157-10, 010-02158-10, and 010-02159-10, depending on the size of the case. The battery provides power to the watch. If you’ve identified that your [link|https://www.ifixit.com/Wiki/Garmin_fenix_6X_Sapphire_Troubleshooting#Section_The_Battery_is_Bad|battery has gone bad], then this guide will instruct you on how to replace it. First you will need to remove the motherboard in order to access the battery. You will need a soldering iron to reattach the battery, scissors or a pocket knife to disconnect the battery. Make sure you identify which wires connect to which terminals on the watch before you remove them. Take extreme care when soldering as to not drip solder on any other parts of the watch. Also take extreme care to not tear the ribbon at the bottom when taking out the battery. Be careful to not damage the battery when removing it. |
|