|
| # Remove the battery:[br] |
|
| # Unplug and remove, It’s lightly glued on the backside[br] |
|
| # Unscrew the little black screw on the PCB which clamps the antenna cable[br] |
|
| # Unscrew the PCB:[br] |
|
| # Three kind of big silver head screws[br] |
|
| # Remove the PCB[br] |
|
| # Unplug data cable:[br] |
|
| # Lift the adhesive tape, then the white part / connector pulls up to release the cable[br] |
|
| # Remove all silver and black screws[br] |
|
| # The backplate cover:[br] |
| [br] |
| start in the left top and lift / pull very slowly until you completely remove it. It’s pretty robust, but the adhesive is very strong, so take your time on this step.[br] |
|
| # Unscrew all the little black screws and the remove the metal baseplate |
| I have uploaded pictures, so please take a look at them if needed |
|
| Hope this helps and thanks to all the guys that helped |
|
| * ++Inchness++ |
| * [link|https://www.ifixit.com/User/347005/Mike+Page|Mike Page|new_window=true] |
| * [link|https://www.ifixit.com/User/2920528/Rafael+Munoz|Rafael Munoz|new_window=true] |
| * ++[link|https://www.ifixit.com/User/3945491/Kris+Rodriguez|Kris Rodriguez|new_window=true]++ |
| * [link|https://www.ifixit.com/User/4185942/Chad.Ruei|Chad.Ruei|new_window=true] |