| If the lamp in your Epson projector starts to produce a deteriorated or dark image, use this guide to remove and replace your lamp. |
| Use this guide to remove and replace your lamp if it produces a deteriorated or dark image of your Epson PowerLite 410W. |
|
| The lamp is a piece of equipment that comes with the projector, and it helps to project an image onto the corresponding screen. A faulty lamp is one that may be producing a distorted image onto the screen you are projecting to. In some cases, your projector may not produce an image at all if the lamp starts to produce a distorted image. |
|
| Before using this replacement guide, make sure to review the [link|https://www.ifixit.com/Wiki/Epson_Powerlite_410W_Troubleshooting?revisionid=HEAD |troubleshooting page] - oftentimes, a distorted image can be fixed without replacing the lamp. |
|
| When you are disposing of your old lamp, make sure to check out your state’s requirements for disposal of the lamp, since it does contain mercury in it. |
|
| Once you have installed the new lamp, remember to reset the lamp timer in the menu. |