|
crwdns2866306:0crwdne2866306:0 |
|
|
Type |
|
|
Thing |
|
|
Title |
| Unihertz Jelly Phone Battery Replacement |
|
|
Introduction |
| Please note that this guide applies to the original Unihertz Jelly/Jelly Pro phone, but NOT to Jelly 2. | | | Changing the battery for Jelly/Jelly Pro is easy, but finding the battery may not be. The following batteries are compatible: | | | Manufacturer: Unihertz, Part No.: LBA 1509 | | | Manufacturer: Cameron Sina, Part No.: SCP-50LBPS , Replace for Kona S2150, CS-KYS215XL | | | These are 3.7 or 3.8 Volt 950 mAh batteries (Cameron Sina may have X-Longer logo printed on it). Orient the battery so that the terminals are located on top, +/- markings facing you. In this orientation, negative terminal MUST be leftmost (closest to the battery left side). This is very important as there are batteries of similar dimensions but reversed polarity. Be careful if you go after non-Unihertz battery! Check polarity/voltage. | | | The back cover of the phone is removable. There is a slot at the bottom corner of the back cover from which it can be pryed open. The battery is user replacebale. | | | | | See this youtube video: | | | https://www.youtube.com/watch?v=YGb5p7ahY9E |
|
|
Time Required Min |
crwdns2931273:0crwdne2931273:0
|
|
Time Required Max |
crwdns2931273:0crwdne2931273:0
|
|
Difficulty |
Moderate
|
|
Conclusion |
| To reassemble your device, follow these instructions in reverse order. |
|
|
Author |
|
|
Public |
crwdns2853046:0crwdne2853046:0
|