|
Introduction |
| The ResMed S9 VPAP Auto, commonly referred to as a VPAP. This guide will direct you to access and replace the blower within the device. The blower is used to cycle air through the device, circulating air through the filters and blowing the air through the hose and to the user of the device. When the blower malfunctions, the device will not be working. There will be no circulation through the filters and through the device. Replacing the blower with a new or functioning one will completely fix the problem. For more information on the device, go to the [https://www.airwayoxygeninc.com/|manufacturer’s home page.] | | | | | While removing the top panel to access the motherboard, be careful not the apply pressure to the side of the control knob. It has been known so snap off due to an impact or to pressure. |
|