|
Introduction |
| Disruption in the flow of water of your Bella Linea coffee maker (model CM1075T-ET) can have several causes, including clogged or damaged water tubes and valves. Use this guide to access and clean or replace these malfunctioning parts. | | | Clogs in a coffeemaker are often caused by calcium buildup within the machine from constant water flow. This buildup can be minimized by using a descaling cleaner on a regular basis. Instructions on how to clean your coffee maker can be found at this [https://www.mrcoffee.com/blog/archive/2020/april/how-to-clean-your-coffee-maker-the-easy-way.html#:~:text=%20THE%20ONCE-A-MONTH%20BASIC%20CLEANING%20METHOD%20%28FOR%20DRIP,3%20Repeat%20Twice%2C%20with%20Water%20Only%20More%20|++link++]. Before replacing any parts of your Bella Linea coffee maker, try using one of the cleaning methods linked above and see if it solves the issue you are having. | | | Sometimes, the calcium buildup is too large to be broken down chemically, or another issue is causing disruption in the flow of water. When this is the case, the valves and tubes that make up the water flow system need to be either deeply cleaned or replaced. | | | This guide will teach you how to access three of the water tubes in your Bella Linea coffee maker: one that connects the water reservoir to the heating element, one that is part of the heating element, and one that connects the heating element to the water dispenser. | | | The tube that connects the water reservoir to the heating element is clear and hallow. The tube that is part of the heating element is metal and curved. The tube going from the heating element to the water dispenser is clear and has a valve inside of it that allows water to flow in only one direction (from the heating element to the water dispenser). This guide focuses on replacing the clear tube with the valve in it. You can see images of these tubes in steps 7 and 8. | | Before buying a water flow tube valve, try cleaning out each of the water tubes with a pipe cleaner or similar device. Run the water flow tube valve under a faucet to try and see if it is allowing water to flow. If the water flow tube valve is damaged or not allowing water to flow properly, use this guide to replace it. |
|