|
Introduction |
| This guide shows how to remove and replace the rotor for the Honda EU2200IT generator. | | | This is a very involved procedure and requires major disassembly. You may find it helpful to loosely replace the bolts after you removed a part, in order to keep track of the bolts and to keep the screw holes clean. | | '''You will need a flywheel puller with a metric pullercollar set in order to pull the rotor off.''' You can purchase Honda’s puller collar set (07APC-ZY1A100), or you can fashion a set yourself with some metric bolts and washers. | | | '''The rotor is heavily bolted onto a free-spinning shaft.''' An impact wrench may be able to loosen the bolt. You may also need a strap wrench to hold the rotor steady. |
|