crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

crwdns2944351:0crwdnd2944351:0Samsung Galaxy A10 Screen Replacementcrwdnd2944351:0crwdne2944351:0

crwdns2933797:0Adriana Zwinkcrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 Adriana Zwink

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0
Introduction
Use this guide to replace a cracked or broken screen inon your Samsung Galaxy A50.
'''Note''': This guide instructs you to replace only the screen while leaving the original frame and motherboard in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure. Make sure you have the correct part before starting this guide.
'''Before disassembling your phone, discharge the battery below 25%'''. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged.
You’ll need '''replacement adhesive''' to reattach components when reassembling the device.
Conclusion
If possible, turn on your device and test your repair before installing new adhesive and resealing.[br]
If possible, turn on your device and test your repair before installing new adhesive and resealing.
The best way to secure the new screen is to apply a sheet of custom-cut double-sided tape to the back of the screen.
To reassemble your device, follow these instructions in reverse order. Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%).
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our Answers community for help.
If possible, turn on your device and test your repair before installing new adhesive and resealing.[br]
[br]
To reassemble your device, follow these instructions in reverse order. Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%).[br]
[br]
The best way to secure the new screen is to apply a sheet of custom-cut double-sided tape to the back of the screen.[br]
[br]
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].[br]
[br]
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [https://www.ifixit.com/Answers/|Answers community|new_window=true] for help.