|
Introduction |
| When playing a Nintendo Switch every button serves a specific purpose. If any of those buttons are jammed, it renders your gameplay incomplete. This can become very irritating and inconvenient, but can be quickly fixed. With a screw driver and a pair of tweezers, your jammed button problems can be fixed. This fix will provide step by step instructions on how to quickly fix you jammed ZR and ZL buttons on your Nintendo Switch controller. These buttons are located one the right and left sides of your console on the controllers. Because they are used so often, they tend to jam and wear down over time. Excessive force when using them can cause them to jam and not come back up, thus creating our problem. In order to fix these jammed ZR and ZL buttons we’re going to following 7 simple steps. Firstly, flip your Nintendo Switch remote over and locate the 4 screws located on the back at every corner of your remote. Use your Y00 tri-point screwdriver to unscrew the screws and loosen the hard plastic cover on the back. You’ll then lift the hard plastic cover to expose the inside of the remote. Next, locate the ZL (or ZR) button depending on which remote you’re fixing. Use the tweezers to carefully lift and then push the ZL (or ZR) button up to put it back into place. Put the hard plastic cover back on the remote and re-screw it shut. Click the ZL (or ZR)button a couple of times to ensure that you’ve moved it back into place properly, then resume gameplay. |
|