|
Introduction |
For those who own a DL1016 android tablet, these instructions will guide users on the battery replacement of this tablet in case of poor battery performance. | | If your DigiLand DL1016 tablet is experiencing issues such as poor battery performance, overheating, or inaccurate battery percentage readings, it may be time to replace the battery. This guide will walk you through the steps to safely replace the battery and restore your tablet’s performance. | | A tablet battery is a rechargeable, lithium-ion power source that enables the tablet to function without being connected to a power outlet. This is what makes tablets highly portable and convenient, allowing you to carry them almost anywhere without the need of a constant power supply. | | ***What You Should Know:*** | | Before using this guide, inspect the tablet to confirm that your battery is dead/faulty. Common symptoms of a dead or faulty battery include failure to hold a charge, overheating, very short battery life, and battery percentage inaccuracies. For further instructions on inspection, visit the [[Digiland 10.1'' DL1016|troubleshooting page|new_window=true]]. | | The tablet’s battery is a rechargeable lithium-ion power source that makes your device portable and convenient to use. When the battery becomes faulty or stops holding a charge, replacing it can give your tablet a new lease on life. | | In step 4, you will be asked to remove the battery from the tablet. This step requires you to use an ESD safe pry tool to lift the battery up in order to prevent electrostatic discharge from damaging sensitive electronic components. | | ***Before You Begin:*** | | | * Confirm that the battery is dead or faulty by checking for symptoms such as: | | ** Failure to hold a charge. | | ** Short battery life. | | ** Overheating during use or charging. | | ** Inaccurate battery percentage readings. | | * For detailed inspection steps, refer to the [[DigiLand 10.1'' DL1016 troubleshooting page|new_window=true]]. | | ***Important Safety Notes:*** | | | * In step 4, you will be asked to remove the battery from the tablet. This step requires you to use an ESD-safe pry tool to lift the battery up in order to prevent electrostatic discharge from damaging sensitive electronic components. | | Most importantly, proceed with caution and [[What to do with a swollen battery|take appropriate measures|new_window=true]] if the battery you are trying to replace is swollen or punctured. | | | [br] |
|