|
Introduction |
This guide showswill show you how to remove and replace the unloader assembly for the Mi-T-M gas pressure washer. You will need to disconnect many tight pipe fittings in order to disconnect the unloader. | | '''There are two versions of the unloader assembly.''' Earlier pressure washers have an all-in-one assembly (part 8-0631) that’s easy to replace, but gave users the ability to break the pump. | | You will need something that’s 3” tall to place underneath the pump assembly. This can be a wooden block, brick, etc. This will help brace the pump while you work on removing the fittings. | | Later models use a tamper-proof, harder to remove assembly (part 8-0656). This guide covers replacing the tamper-proof assembly, which involves taking it apart fitting by fitting. | | The following tools are optional, but can help with disassembly: | | | '''You will need something that’s 3” tall to place underneath the pump assembly. This will help brace the pump while you work on getting the fittings off.''' | | * 1/4” socket & ratchet | | * 1/2” wrench | | * 11/16” wrench | | * 3/4” wrench | | * 15/16” wrench | | * 1” wrench |
|