|
Introduction |
If you use the iFixit iOpener, be sure to follow the instructions written directly on the iOpener. | | If you are having difficulties with the fingerprint scanner of your ZTE Blade X Max —won’t register fingerprint, only registers some of the time—and have already tried trouble shooting [Insert troubleshooting page link] you will have to replace the fingerprint scanner. | | ''Be cautious removing the back of the phone. If done too roughly you will break the film the fingerprint scanner is attached by.'' | | This guide requires removing the back of the phone, which is not meant to be removed by the consumer. You will have to use heating products to complete this guide. If you are using the iFixit iOpener, or a heating pad, be sure to follow the instructions for that particular product. |
|