|
Introduction |
| Use this guide to remove a broken or defective LCD & Digitizer in your Huawei Honor 8. | | Due to the phone’s design, you must remove the lithium-ion battery in order to access the display cables. '''Do not re-use the battery once it is removed, as doing so is a potential safety hazard.'''
'''Before disassembling your phone, '''discharge the battery below 25%'''. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged. | | | '''Note''': This guide instructs you to replace only the screen while leaving the original frame and motherboard in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure. Make sure you have the correct part before starting this guide. | | | You’ll need '''replacement adhesive''' to reattach components when reassembling the device. |
|