|
| You may not need to use all the adhesive strips included in the kit. If you are transferring the fingerprint sensor, you will need some double-sided tape such as Tesa tape. |
|
| For a list of adhesive strips for the Galaxy S phone, [https://www.ifixit.com/Store/Parts/Samsung-Galaxy-S-Series/Adhesive_Strips|follow this link]. |
|
| When applying adhesive strips like these, here are some general tips: |
|
| * To make adhesive application easier, you can align an unexposed strip to its intended position on the phone, then [https://d3nevzfk7ii3be.cloudfront.net/igi/a6EfdSi3YTRDsMVw.large|tape one edge down to hold the strip in place]. This will allow you to peel away the plastic liners and expose the adhesive without losing alignment. |
| * When you are ready to apply the adhesive, '''peel away the clear plastic liner first'''. This layer usually peels easily. If there are multiple clear plastic layers, remove the clear layer that exposes adhesive. |
| * '''The adhesive exposed after peeling the clear liner determines which surface the strip should be applied to first.''' Locate the surface that aligns with the exposed adhesive. |