|
Introduction |
| Not sure what to do with all the adhesive strips in your back cover kit? You’ve come to the right place![br] | | [br] | This guide shows how to use the back cover adhesive kit for the Galaxy S series with glass backs (S7 and highernewer). It also includes instructions on how to transfer and install various back cover components, such as the camera bezel and fingerprint sensor. | | | You may not need to use all the adhesive strips included in the kit. If you are transferring the fingerprint sensor, you will need some double-sided tape such as Tesa tape. | | | When applying adhesive strips like these, here are some general tips: | | * To make adhesive application easier, you can align the unexposed strips, [https://d3nevzfk7ii3be.cloudfront.net/igi/a6EfdSi3YTRDsMVw.large|then tape an edge down to hold the strip in place|new_window=true]. This will still allow you to peel away the plastic liners without losing alignment. | | * '''Peel away the clear plastic liner first'''. This layer usually peels easily. If there are multiple clear plastic layers, remove the clear layer that exposes adhesive. | | * '''The adhesive exposed after peeling the clear liner determines which surface the strip should be applied to first.''' Locate the surface that aligns with the exposed adhesive. |
|