|
Introduction |
| Use this guide to remove the LCD and digitizer of your Motorola Moto E4 Plus (XT1771). | | | Before you begin, download the [link|https://www.motorola.com/us/rescue-and-smart-assistant/p|Rescue and Smart Assistant|new_window=true] app to backup your device and diagnose whether your problem is software or hardware related. | | | Before disassembling your phone, discharge the battery below 25%. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged. | | '''***This guide replaces only the display while leaving the original frame, motherboard, and battery in place.'''*** Some replacement screens for this phone come pre-installed on a new frame (a.k.a. chassis), which requires following a [guide|120514|very different procedure]—transplanting your phone's internals and installing a new battery. Make sure you have the correct part before starting this guide. | | | You’ll need replacement adhesive to reattach components during reassembly. |
|