|
Introduction |
| Follow this guide to replace a cracked or damaged rear panel on the Nintendo Switch. | | ***The Switch uses JIS screws, and the guide is written to reflect this.. A JIS #00 drivers are specified.driver works best, Youbut you can also use a JIS #000 ifdriver. If you can't obtain a JIS #00. You can use a Phillips #000 screwdriver in a pinchdriver, but be very careful not to stripyou'll risk stripping the screws. If you are having difficulty with the screws, you may find that switching drivers helps, even if the drivers are the same size and type.*** | | | ***Note:*** This guide, and the part we sell, are compatible with the original Nintendo Switch model released in 2017, as well as the newer refreshed model released in 2019 (model numbers HAC-001 and HAC-001(-01), respectively). |
|