|
Introduction |
| Follow this guide to replace a cracked or damaged rear panel on the Nintendo Switch. | | The Switch uses JIS screws, and the guide is written to reflect this. JIS #00 drivers are specified. You can use a JIS #000 if you can't obtain a JIS #00. You may be able tocan use a Phillips #000 screwdriver in a pinch, but it may damage or strip the screws. Bebe very careful not to strip the screws, especially. If you are having difficulty with a Phillips driver. Frequentlythe screws, you may find that switching drivers may helphelps, even if theythe drivers are the same size and type. | | | ***Note:*** This guide, and the part we sell, are compatible with the original Nintendo Switch model released in 2017, as well as the newer refreshed model released in 2019 (model numbers HAC-001 and HAC-001(-01), respectively). |
|