crwdns2936637:0crwdne2936637:0 crwdns2853008:0crwdne2853008:0 crwdns2918746:0crwdne2918746:0

crwdns2944351:0crwdnd2944351:0HP Officejet 5740 Disassemblycrwdnd2944351:0crwdne2944351:0

crwdns2933797:0Johncrwdnd2933797:0crwdne2933797:0

crwdns2936043:0crwdne2936043:0 crwdns2933505:0crwdne2933505:0 John

crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
crwdns2933801:0crwdne2933801:0
Title
HP Officejet 5740 Disassembly
Introduction
Procedure to disassemble HP Officejet 5740 printer

Tools #10 Torx driver, needle nose pliers, small flat blade screw driver, small flashlight, clean workspace, a vertical support at the back of the work area. There are smaller torx head screws on the inside of the machine but I am not getting into it that deep now.

1 It is assumed that you have unplugged the data cables and using the soft ware of the printer moved the printer head away from the parked position prior to disconnecting the power plug so it can't return to the parked position.

2 Pull the out feed shelf gently out of the front of the printer.

3 In order to release the paper tray you must remove the bottom right slide rail. It is held in place by three screws from underneath. The paper tray will slide all the out with the rail removed.

4 Apply tape to the bulk feeder / scanner doors to attach them to the main cover. In a later step you must get the main cover open to vertical position in order to proceed with teardown. The tape keeps all three pieces held together

5 Do not try to pry the end panels off. They do not come off that way.

I have no pictures. Use your imagination
Time Required Min
crwdns2931291:02crwdne2931291:0
Time Required Max
crwdns2931291:02crwdne2931291:0
Conclusion
To reassemble your device, follow these instructions in reverse order.
Public
crwdns2853046:0crwdne2853046:0
crwdns2853045:0crwdne2853045:0

crwdns2943215:0crwdne2943215:0

  • #10 Torx driver, needle nose pliers, small flat blade screw driver, small flashlight, clean workspace, a vertical support at the back of the work area. There are smaller torx head screws on the inside of the machine but I am not getting into it that deep x1 added.

crwdns2933623:0crwdne2933623:0

crwdns2933815:01crwdne2933815:0
crwdns2933769:0crwdne2933769:0
crwdns2933771:0crwdne2933771:0
stepid 191453 stepid 191453