crwdns2915892:0crwdne2915892:0
Use this guide to replace the screen on the Zeki Droid TBDC1093B.
Follow these instructions to disassemble the Zeki Droid and gain access to the broken screen. To prevent injury, I recommend following this guide to reinforce the broken glass.
crwdns2942213:0crwdne2942213:0
-
-
Remove the back casing by slowly popping each tab out with a plastic opening tool.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Remove the tapes one by one from the connecting wires with tweezers.
-
-
-
Remove the black clips from both sides of the casing with a plastic opening tool.
-
-
-
-
Remove the speakers from the back casing.
-
-
-
Pull the speakers away from the back casing carefullly.
-
-
-
Detach the motherboard from the framing by removing the four screws using a Phillips #000 screwdriver.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Lift the camera and flash components from their fittings using tweezers.
-
-
-
Lift the metal framing to reach the components at the front of the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.