crwdns2915892:0crwdne2915892:0
This guide is a prerequisite to removing the viewfinder lens and/or LCD.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 7.5 mm Phillips screws on the front of the viewfinder housing.
-
Remove the four 7.1 mm Phillips screws from the back of the viewfinder housing.
-
-
-
Pull the two halves of the viewfinder housing apart.
-
-
-
Use the tip of a spudger to flip up the retaining flap on the LCD ribbon cable ZIF connector.
-
-
-
-
Use the tip of a spudger to push out the retaining clip on the viewfinder backlight ribbon cable ZIF connector.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using your fingers or tweezers, gently pull out the backlight ribbon cable from its connector on the button board.
-
-
-
Using your fingers or tweezers, remove the LCD ribbon cable from its connector on the button board.
-
-
-
Remove the viewfinder lens assembly from the viewfinder housing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.