crwdns2915892:0crwdne2915892:0
How to remove the screen for the ZTE ZMAX Z970. Removing the screen is easiest with an iOpener which requires a microwave.
crwdns2942213:0crwdne2942213:0
-
-
Insert a fine point tool into the hole on the top left side of the phone to remove the SIM and SD card trays.
-
Pull out the trays.
-
-
-
Insert a plastic opening tool into the groove between the phone’s back cover and casing.
-
Move the plastic opening tool along the edges of the phone to unclip the two pieces.
-
-
-
Remove the ten 1.2mm screws with a Phillips #000 screwdriver.
-
-
-
-
Remove the mid frame with the plastic opening tool.
-
-
-
Disconnect the battery from the motherboard.
-
-
-
Wedge a spudger underneath the battery and gently pry upwards to remove the battery.
-
Once free from the glue, remove from device.
-
-
-
Heat up the iOpener for 30 seconds and place on top of the phone for 2 minutes.
-
-
-
Wedge the opening picks into all the corners of the phone and lift until the screen comes off.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.