crwdns2915892:0crwdne2915892:0
If the camera seems cracked and/or not functioning, this is a quick guide on how to remove the existing camera.
crwdns2942213:0crwdne2942213:0
-
-
Pry open back cover of the device from the crease at the bottom left corner with an opening tool or fingernail.
-
-
-
Remove all 16 screws with a J000 screwdriver.
-
-
-
-
Remove the battery with an opening tool or fingernail.
-
-
-
Gently pry open the device body by tugging from the inside out, be sure to pull up and away from device.
-
-
-
Once body is removed, back-facing camera is placed at the top left corner of device.
-
Using an opening tool, pull up the tab of the camera wire ribbon.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using the blunt-nose tweezers, tug at the camera gently, switching sides to remove adhesive little by little, pull camera out gently.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.